HP Color LaserJet 500-sheet Paper Trays
Showing 1–24 of 66 results
-
500-sheet paper cassette tray assembly – Slides in the feeder base assembly
$98.54 -
Paper pick-up roller – For tray 3
$67.75 -
1 x 500 sheet paper feeder tray assembly
$218.89 -
Installation guide – For HP Laserjet 5500/5550 500-sheet paper feeder
$50.38 -
Photo-interrupter sensor assembly (Does not include the sensor flag) – For sensing paper feed – Mounts on the front underside of the center frame assembly
$50.38 -
Door open detection switch (SW103)
$50.38 -
Roller kit – Includes the cassette separation roller, pickup roller and feed roller – The separation roller mounts in the cassette tray assembly, the pickup and feed rollers mount in the pickup assembly – All three should be replaced at the same time
$50.38 -
Slotted thumbscrew (with large flat head) – Used to mount the paper feeder assembly to the printer or another feeder assembly (Four used per feeder assembly)
$50.38 -
Paper feeder driver PC board assembly
$66.18 -
500-sheet paper feeder front upper cover assembly
$55.28 -
500-sheet paper feeder right lower cover assembly
$57.42 -
500-sheet paper feeder right door assembly Part RM1-6946-000CN , RM1-6946-010CN
$190.43 -
Paper pick-up assembly – For trays 3,4, and 5 Part RM1-6944-000CN , RM1-6944-020CN
$317.23 -
500-sheet paper cassette tray assembly – Pull out cassette where the paper is loaded into – Can be used as tray 3, 4 , 5 or 6 Part RM1-6942-000CN , RM1-9413-000CN
$111.88 -
Lifter drive assembly – Provides lift support for high capacity input paper tray
$67.47 -
Separation pad assembly – Includes the metal pivoting support frame with the plastic snap-on separation pad assembly – Mounts in the 500-sheet paper cassette tray assembly
-
Sensor cable assembly – Connects between the paper feed sensor and the feed drive board – Mounts on the right side of the center frame assembly
-
Cable assembly – Connects between the 6-pin printer interface connector and the feed drive board – Mounts on the right side of the center frame assembly
-
Feed driver board assembly – Small interconnecting board – Mounts on the right side of the center frame assembly
-
Paper pickup roller assembly – Includes the ‘D’ shaped rubber roller on a plastic shaft – Mounts in the lower center of the center frame assembly
-
Pressure roller assembly – Plastic support frame with two small spring loaded rollers – Rolls against the rubber feed roller – Mounts on the underside of the center frame assembly
$140.91 -
Swing assembly – Includes the paper feed clutch assembly and the printer driven gear in a spring loaded arm – Mounts on the right side of the center frame assembly
-
500-sheet paper cassette tray assembly (only) – Inserts in the 500-sheet feeder base asembly
$125.37 -
Paper pickup drive assembly – Includes a metal plate with the paper feeder pickup clutch, paper feeder pickup solenoid, feed drive board, pickup roller drive shaft, and drive gears – Mounts on the right side of the center frame assembly
