Compaq Professional 6000 series
Showing 1–24 of 47 results
-
Voltage regulator module – For either 5.0VDC or 12.0VDC nominal input voltage, Output voltage ranges from 1.3VDC to 3.5VDC adjusted using a 5-bit code – 14.2A (40W) maximum output
$50.38 -
SPS-MEM MODULE,64MB,EDO,60NS
$50.38 -
System ROMPaq – Flash ROM Software – On 3.5-inch floppy disk (English)
-
SmartStart for workstations on CD-ROM (Version 1.20B) – Step-by-step process to configure the workstation for Microsoft Windows NT (Japanese)
-
SmartStart for workstations on CD-ROM – Step-by-step process to configure the workstation for Microsoft Windows NT (Canadian French)
-
SmartStart for workstations on CD-ROM (Version 1.20B) – Step-by-step process to configure the workstation for Microsoft Windows NT (For the United Kingdom)
-
SmartStart for workstations on CD-ROM (Version 4.20) – Step-by-step process to configure the workstation for Microsoft Windows NT (English)
-
Microsoft Windows NT 4.0 software on CD-ROM – For workstations with one or two processors (Canadian French)
-
Microsoft Windows NT 4.0 software on CD-ROM – For workstations with one or two processors (European French)
-
Microsoft Windows NT 4.0 software on CD-ROM – For workstations with one or two processors (English)
-
Diskette/CD-ROM drive power cable
-
IDE dual device cable – 40-pin (F) connector to two 40-pin(F) connectors, 27.9cm (11in) long
-
Maintenance and Service Guide
-
Compaq Professional Workstation 6000 and 8000 illustrated parts map
-
Illustrated Parts Map Guide
-
Internal CD-ROM/DVD audio cable – 4-pin (F) to 4-pin (F), 27.94cm (11in) long
-
Microsoft Windows NT 4.0 CD – For workstations with three or four processors (Japanese)
-
Localization kit (country kit)
-
Processor cage assembly – Includes the system processor board (With two processor board slots, memory expansion board slot, and four DIMM slots), the cage assembly, and the processor fan assembly
$126.74 -
Front rack mounting bezel – Includes the front plate with attached pull handles – Covers the front of the chassis and is used to secure the computer in the rack assembly
-
Fire GL 4000 graphics controller board – Has 16MB CDRAM DIMM memory, 220MHz RAMDAC, one 3-pin mini-DIN stereographics connector, and one 15-pin VGA monitor output connector – Occupies one PCI slot
$90.35 -
Power supply panel (or bracket) – Rectangular panel that is used to mount the power supply in the chassis assembly
-
Chassis assembly – The internal metal structure of the computer (Does NOT include the I/O card cage, processor cage, or removable covers)
-
Power switch assembly – Includes the power switch, swith mounting bracket, and two plastic LED holders
